Steering Speed - FUTABA 3PJ Super Instruction Manual

Quick steering operation will cause momentary understeering, loss of speed, or spin-
ning. This function is effective in such cases.
Understeering
Operation
- This function limits the maximum speed of
the steering servo. (Delay function)
- The steering speed when the steering wheel
is operated (TURN direction) and returned
(RETN direction) can be independently set.
- If the steering wheel is turned
slower than the set speed, the steer-
ing servo is not affected.
1. (TURN direction setting)
Call the steering speed func-
tion set-up screen by press-
ing the UP key twice at the ini-
tial screen.
2. Adjust the steering servo
TURN direction delay with the
+ or - key.
(The RETN direction setting
is affected.)
3. (RETN direction setting)
Press the SELECT key once.

Steering Speed

Steering speed not set
- 2 times
- Return to the initial value (100%) by pressing the + and - keys
simultaneously for about one second.
Servo operation is delayed.
Spin
Steering speed set
TURN direction
Turning speed adjustment range
(Approx. 1.5 to 0.1 secs)
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
At 100% there is no delay.
At 1%, the delay is approximately
DIRECT ST.EXP M.SEL
UP +
1.5 seconds.
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
Blink
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
At 100%, there is no delay.
At 1%, the delay is approximately
1.5 seconds.
Smooth cornering
RETN direction
Return speed adjust-
ment range (Approx. 1.5
to 0.1 secs)
Time
Setting range: 1~100%
Servo operation is delayed.
Setting range: 1~100%
49