FUTABA 3PJ Super Instruction Manual page 41

(EXP2 curve)
The EXP2 curve can also be set for the forward side. The brake side is the EXP curve.
1) When you want to increase
the servo sensitivity, pull the
throttle trigger to the forward
side and adjust with
the + key. When you
want to decrease the
servo sensitivity, push the
throttle trigger to the forward
side and adjust with the - key.
2) When you want to change the
curve switching point relative
to the throttle trigger, call the
point change screen by
pressing the SELECT key.
3) Adjust the switching point
with the + and - keys.
4) When you want to increase
the brake side servo sensitiv-
ity, push the throttle trigger to
the brake side and adjust with
the + key. When you
want to decrease the
brake side servo sen-
sitivity, push the throttle trig-
ger to the brake side and ad-
just with the - key.
TG.P=50%
(neutral)
(full high)
(quick)
(mild)
Throttle trigger
forward side
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
DIRECT ST.EXP
UP
SETUP
SELECT DOWN
TH.EXP ATV
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
TG.P=20%
(quick)
(mild)
M.SEL
+
RESET
-
CUSTOM
Setting range; -100~0~+100%
M.SEL
+
RESET
-
CUSTOM
Setting range; 20~80%
- Return to the initial value (50%)
by pressing the + and - keys si-
M.SEL
+
RESET
-
CUSTOM
multaneously for about one sec-
ond.
M.SEL
+
RESET
-
CUSTOM
Setting range; -100~0~+100%
TG.P=80%
(quick)
(mild)
41