FUTABA 3PJ Super Instruction Manual page 102

Battery Holder (Transmitter)
This battery holder is necessary when using the transmitter with a dry cell battery.
For a description of how to install the battery holder to the transmitter, see "Ni-cad
Replacement" on page 18.
Part name
3PJ transmitter battery holder
<Check>
Turn on the power switch and check the LCD battery voltage display. When the
batteries are new, the voltage should be about 12V.
If the voltage does not rise, check for faulty contact or incorrect polarity.
<Processing the Dry Cell Batteries>
The method of processing used dry cell batteries depends on the area in which you
reside. Process the batteries in accordance with the processing method for your area.
Data Pac (DP-16K)
When the Data Pac is used, the model data for eight model can be saved, in addition
to the eight model memories provided with the transmitter. Since the Data Pac can be
freely carried as a separate unit, the saved data can also be used with other 3PJ SU-
PER transmitters.
102
(Penlight cell x 8)
Part Name
DP16K
Caution
Insert the batteries in the correct po-
larity.
If the polarity is incorrect, the transmitter may be
damaged.
When the transmitter is not in use,
remove the batteries.
If the battery electrolyte leaks, wipe off the case and
contacts.