FUTABA 3PJ Super Instruction Manual page 53

11. (Operating point setting)
Press the SELECT key once.
The operating point set-up
screen is called.
12. Adjust the throttle trigger op-
erating point with the + or -
key.
Operating point:
The throttle trigger po-
sition at which the
A.B.S. function is acti-
vated can be set.
Range over which A.B.S. is not activated
13. (Steering mixing setting)
Press the SELECT key once.
The steering mixing set-up
screen is called.
14. Adjust the steering mixing
operation range with the + or -
key.
Steering mixing:
The range over which the A.B.S.
function reacts to operation of the
steering wheel when the throttle
trigger is pushed to the brake side
can be set.
When the steering wheel was oper-
ated, the A.B.S. function operates
over the range indicated by the *.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
A.B.S activation range
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value (OFF) by pressing the + and - keys
simultaneously for about one second.
N50%
A.B.S. operation range indicated by *
E50%
A.B.S operation range
indicated by *
Blink
Setting range: 10~100%
- Return to the initial value (10%)
by pressing the + and - keys si-
multaneously for about one sec-
ond.
Blink
Setting range: OFF, N10~N100%,
E10~E100%
A.B.S operation range
indicated by *
53