FUTABA 3PJ Super Instruction Manual page 52

5. (Pumping cycle setting)
CYCL
Press the SELECT key once.
The pumping cycle set-up
screen is called.
6. Adjust the pumping cycle with
the + or - key.
- The smaller the value, the
shorter the pumping cycle.
7. (Pumping duty ratio setting)
Press the SELECT key once.
The pumping duty ratio set-
up screen is called.
8. Adjust the pumping duty ratio
with the + or - key.
(Reference)
Low grip: - side
High grip: + side
Braking time is short
(Brakes do not lock easily)
9. (Delay setting)
Press the SELECT key once.
The delay set-up screen is
called.
10.Adjust the delay with the + or
- key.
Delay:
Function that increases the time
before A.B.S. is activated when
the throttle trigger is pushed to
the brake side.
52
-3 0 +3
Braking time is long
(Brakes lock easily)
- Return to the initial value (0%) by pressing the + and - keys simul-
taneously for about one second.
Note: (When throttle trigger pushed to brake side)
DLY=0%: A.B.S. activated immediately
DLY=10%: A.B.S. activated after 0.14 second delay
DLY=50%: A.B.S activated after 0.7 second delay
DLY=100%: A.B.S. activated after 1.4 seconds delay
Blink
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
SELECT DOWN -
TH.EXP ATV CUSTOM
- Return to the initial value (15) by
DIRECT ST.EXP M.SEL
+
UP
pressing the + and - keys simulta-
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
neously for about one second.
Blink
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET - Return to the initial value (0) by
-
SELECT DOWN
TH.EXP ATV CUSTOM
pressing the + and - keys simulta-
neously for about one second.
Blink
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
Setting range: 1~30
Setting range: -3~0~+3
Setting range: 0~100%