FUTABA 3PJ Super Instruction Manual page 69

Lap Navigation Timer Operating Instructions
(Start/navigation buzzer restart/stop)
When the timer switch (initial setting: PSH) is pressed, the timer starts and an audible
tone sounds at a preset interval. (Navigation buzzer) Thereafter, the buzzer is re-
started each time the timer switch is pressed. When the SELECT key is pressed, the
timer stops.
(Reset)
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
LN: Lap navigation timer
2. Press the + and - keys simul-
taneously for about one sec-
ond. The timer is reset.
3. To end resetting, press the
UP key two times. (Return to
initial screen.)
Starting Linked With Throttle Trigger
The timer is started by the following method. (Other operations are the
same as the operating instructions given above.)
1. Press the DOWN key two
times at the initial screen. The
timer screen is called.
LN: Lap navigation timer
2. (Setting the ready state)
Press the + and - keys simul-
taneously for about one sec-
ond at the timer screen.
READY is displayed and the
timer enters the ready state.
(Start/navigation buzzer restart/stop)
When the throttle trigger is moved to the forward side, the timer starts. Therafter, the
navigation buzzer starts each time the timer switch (initial setting: PSH) is operated.
When the SELECT key is pressed, the timer stops.
(Resetting)
(Same as described above.)
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- 2 times
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
Blink
Blink
Blink
Blink
69