Traction Control - FUTABA 3PJ Super Instruction Manual

Table of Contents

Sudden trigger operation on a slippery track not

only causes the wheels to spin, but also prevents

smooth acceleration. Smooth and pleasant control

is possible and battery consumption can be mini-

mized by setting the traction control function.

Operation

The traction control function prevents the drive wheels from spinning even if the

trigger is operated more than necessary by providing a delay when the throttle servo

(amp) operates. This delay function is not performed when the trigger is released and

during braking.

- Low side traction control

Used to apply a delay from the neutral position to the set point (delay point).

- High side traction control

Used to apply a delay at the high side from the set point.

1. Call the traction control func-

tion set-up screen by press-

ing the DOWN key four times

at the initial screen.

2. Activate the traction control

function by pressing the + or -

key.

3. (Delay amount setting)

Press the SELECT key once.

4. Adjust the delay amount with

the + or - key,.

If the delay is too large, op-

eration will be delayed.

Setting Example

Adjust within the entire range (0~100%) according to the conditions.