FUTABA 3PJ Super Instruction Manual page 25

LCD Screen Contrast
The LCD screen contrast can be adjusted. (For more information, see page 94.)
Caution
Do not adjust the contrast so that the LCD is too bright or too dark.
When the display cannot be read due to a temperature change, data cannot be set.
LCD Screen Temperature Change
In the following cases, the LCD may become difficult to read due to a temperature
change.
- On hot summer days and cold winter days, the LCD may be easy to read indoors, but difficult to
read outdoors.
- If the contrast is too bright or too dark, temperature changes and lighting conditions may cause the
screen to become difficult to read.
Contrast Adjustment
1 Turn on the transmitter power.
2 Press the DIRECT key twice.
3 Press the UP and DOWN keys
simultaneously.
4 Press the DOWN key six times.
Total Timer
The total timer shows the total time from the last time it was reset.
Reset
1 At the total time display, press
the + and - keys simulta-
neously for about one sec-
ond.
5 If the screen is too dark, adjust
the screen to the point where it
can be easily read. If the screen
is too dark, press the - key. If the
screen is too bright, press the +
key.
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
25