FUTABA 3PJ Super Instruction Manual page 62

5. (Delay point setting)
Press the SELECT key once.
6. Set the delay point with the +
or - key.
When the throttle trigger is
operated, "*" is displayed
over the traction control func-
tion range and the set point
can be checked.
7.At the end of adjustment.
press the UP key 4 times, or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
Switch Setting
The traction control function is turned on and off with PSH or SLD. Function select
function (Page 89)
Operation Display
The LED flashes while the traction control function is activated.
62
Range over which
RNG L50%
delay applied
RNG H50%
Throttle trigger neutral position
(ALL applies a delay to all areas.)
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- Return to the initial value
(L40%) by pressing the + and -
keys simultaneously for about
one second.
Range over which
delay applied
Throttle trigger High side
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
- 4 times
Blink
Setting range: OFF, L99~L1,ALL,
H1~H99,OFF
"H": High side traction control
"L": Low side traction control
"ALL": Delay applied over the en-
tire range traction control range.