Throttle Exp/Exp2/Crv - FUTABA 3PJ Super Instruction Manual

Table of Contents

This function changes the sensitivity of the throttle servo in the throttle trigger for-

ward side and brake side directions. It has no effect on the servo maximum travel.

For the forward side, the set-up screen for the curve selected with the throttle curve

selection function (page 98) appears on the LCD. The throttle curve can be selected

from among three curves (EXP/EXP2/CRV).

Racers Tip

When the track conditions are good and there is no sense of torque at the power unit,

set each curve to the + (quick) side. When the track is slippery and the drive wheels

lose their grip, set the curves to the - (mild) side.

1. Access the DIRECT mode by

pressing the DIRECT key.

2. Call the Throttle EXP/EXP2/

CRV function set-up screen

by pressing the THEXP key.

(EXP curve)

1) For forward adjustment, when

you want to increase the sen-

sitivity of the servo, pull the

throttle trigger to the forward

side and adjust with the +

key. When you want to de-

crease the sensitivity of the

servo, pull the throttle trigger

to the forward side and adjust

with the - key.

2) For brake side adjustment,

when you want to increase

the sensitivity of the servo,

push the throttle trigger to the

brake side and adjust with the

+ key. When you want to de-

crease the sensitivity of the

servo, push the throttle trig-

ger to the brake side and ad-

just with the - key.