Battery Fail Safe (Pcm Mode Only) - FUTABA 3PJ Super Instruction Manual

Battery Fail Safe (PCM Mode Only)

This function will move the throttle servo to the preset Fail Safe position when the
receiver battery voltage drops below a specified value. See page 91 for a description
of the Fail Safe function.
(This function can be used only with PCM1024 system receivers.)
1. Call the Set-Up mode screen
by pressing the UP and
DOWN keys simultaneously
at the initial screen.
2. Call the Battery Fail Safe
function screen by pressing
the UP or DOWN keys in
function map order.
3. (Function ON/OFF selection)
Select ON or OFF with the +
or - key.
4. At the end of adjustment,
press the UP and DOWN
keys simultaneously. Or
press the DIRECT key twice.
(The display returns to the ini-
tial screen.)
92
Battery Fail Safe Reset
When the battery voltage recovers, the Battery Fail Safe
function is reset.
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
Setting range: OFF, ON
DIRECT ST.EXP M.SEL
UP +
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM
DIRECT ST.EXP M.SEL
+
UP
SETUP RESET
-
SELECT DOWN
TH.EXP ATV CUSTOM