Dc Output Specification; Table 57. Edge Finger Power Supply Connector Pin-Out - Intel SC5299BRP Technical Product Specification

®
Intel Entry Server Chassis SC5299-E TPS
primary and secondary circuits, and primary to ground circuits, complies with the IEC 950
spacing requirements.
2.3.2.12 Power Factor Correction
The power supply incorporates a power factor correction circuit.
The power supply has been tested as described in EN 61000-3-2: Electromagnetic Compatibility
(EMC) Part 3: Limits- Section 2: Limits for harmonic current emissions, and meets the harmonic
current emissions limits specified for ITE equipment.
The power supply has been tested as described in JEIDA MITI Guideline for Suppression of
High Harmonics in Appliances and General-Use Equipment and meets the harmonic current
emissions limits specified for ITE equipment.
2.3.3

DC Output Specification

2.3.3.1 Connector
The power supply provides card edge fingers, which mate to a connector located inside the
system. It is a blind-mating type of connector that connects the power supply's output voltages
and signals. The card edge finger pin assignments are defined in the following table.

Table 57. Edge Finger Power Supply Connector Pin-out

Connector
Gold finger edge
connector: 2X24
Revision 3.1
Upper Side
+12V 1
+12V 3
+12V 5
+12V 7
+12V 9
+12V 11
+12V 13
+12V 15
+12V 17
+12V Return 19
+12V Return 21
+12V Return 23
+12V Return 25
Intel order number D37594-005
Pin No Pin No.
Top. Bottom
2 +12V
4 +12V
6 +12V
8 +12V
10 +12V
12 +12V
14 +12V
16 +12V
18 +12V
20 +12V Return
22 +12V Return
24 +12V Return
26 +12V Return
Power Sub-system
Bottom Side
51