®
Intel
Entry Server Chassis SC5299-E TPS
Appendix A: Integration and Usage Tips
Appendix A: Integration and Usage Tips
®
This appendix provides a list of useful information that is unique to the Intel
Entry Server
Chassis SC5299-E and should be kept in mind while integrating and configuring your server.
To maintain system thermals, fixed hard drive bays must be populated in the slots in this order:
1, 3, 5, 2, 4, and 6.
To maintain system thermals, hot-swap hard drive bays must be populated with either a hard
drive or drive blank.
System fans are not hot swappable.
The CPU air duct(s) must be used to maintain system thermals.
®
®
The Intel
Local Control Panel can only be used with systems configured with an Intel
Management Module.
Make sure the latest system software is loaded on the server. This includes system BIOS,
FRU/SDR, BMC firmware, and hot-swap controller firmware. The latest system software can be
downloaded from:
http://support.intel.com/support/motherboards/server/
Revision 3.1
137
Intel order number D37594-005