1. Manuals
  2. Brands
  3. Intel Manuals
  4. Chassis
  5. C50277-001
  6. User manual

Intel C50277-001 User Manual

Entry server chassis
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Intel® Entry Server Chassis SC5275-E
User Guide
A Guide for Technically Qualified Assemblers of Intel® Identified
Subassemblies/Products
Order Number: C50277-001

Advertisement

Table of Contents
loading

Related Manuals for Intel C50277-001

Summary of Contents for Intel C50277-001

  • Page 1 Intel® Entry Server Chassis SC5275-E User Guide A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products Order Number: C50277-001...
  • Page 2 Intel’s own chassis are designed and tested to meet the intended thermal requirements of these components when the fully integrated system is used together. It is the responsibility of the system integrator that chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to determine the amount of airflow required for their specific application and environmental conditions.

  • Page 3: About This Manual

    This document provides a brief overview of the features of the board/chassis, a list of accessories or other components you may need, troubleshooting information, and instructions on how to add and replace components on the Intel® Entry Server Chassis SC5275-E. For the latest version of this manual, refer to http://support.intel.com/support/motherboards/server/chassis/SC5275E.

  • Page 4: Additional Information And Software

    Intel® Entry Server Chassis SC5275-E User Guide Intel® Server Chassis SC5275-E Technical Product Specification at http://support.intel.com/support/motherboards/server/chassis/ SC5275E. Intel® Entry Server Chassis SC5275-E Quick Start User’s Guide in the product box http://support.intel.com/support/motherboards/server/chassis/ SC5275E http://www.support.intel.com/support/motherboards/server/ch assis/SC5275E/compat.htm (link to spares, parts, and config guide) http://www.support.intel/com/support/mothterboards/server/S...

  • Page 5: Warnings

    Before computer integration, make sure that the chassis, power supply, and other modules have passed EMC testing using a server board with a microprocessor from the same family (or higher) and operating at the same (or higher) speed as the microprocessor used on this server board.

  • Page 6: Safety Cautions

    Safety Cautions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the Resource CD and/or at http://support.intel.com/support/motherboards/server/safecert.htm. The power supply in this product contains no user-serviceable parts. There may be more than one supply in this product.

  • Page 7: Wichtige Sicherheitshinweise

    Wichtige Sicherheitshinweise Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel- Serverplatinen und -Servergehäusen unter http://support.intel.com/support/motherboards/server/safecert.htm. Intel® Entry Server Chassis SC5275-E User Guide...
  • Page 8 Außerdem können einige Platinen und Gehäuseteile scharfe Spitzen und Kanten aufweisen. Arbeiten an Platinen und Gehäuse sollten vorsichtig ausgeführt werden. Sie sollten Schutzhandschuhe tragen. Bei falschem Einsetzen einer neuen Batterie besteht Explosionsgefahr. Die Batterie darf nur Intel® Entry Server Chassis SC5275-E User Guide viii...
  • Page 9 Consignes de sécurité Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document avant de suivre toute instruction. Consultez Intel Server Boards and Server Chassis Safety Information sur le site http://support.intel.com/support/motherboards/server/safecert.htm. Le bloc d'alimentation de ce produit ne contient aucune pièce pouvant être réparée par l'utilisateur.
  • Page 10 Isolé de forts champs électromagnétiques géenérés par des appareils électriques. Dans les régions sujettes aux orages magnétiques il est recomandé de brancher votre système à un supresseur de surtension, et de débrancher toutes les lignes de Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 11: Instrucciones De Seguridad Importantes

    Instrucciones de seguridad importantes Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety Information en en http://support.intel.com/support/motherboards/server/safecert.htm. El usuario debe abstenerse de manipular los componentes de la fuente de alimentación de este producto, cuya reparación debe dejarse exclusivamente en manos de personal técnico...
  • Page 12 L’interruttore attivato/disattivato nel pannello anteriore non interrompe l’alimentazione in c.a. del sistema. Per interromperla, è necessario scollegare tutti i cavi di alimentazione in c.a. dalle prese a muro o dall’alimentazione di corrente. Intel® Entry Server Chassis SC5275-E User Guide...
  • Page 13 In caso di temporali, scollegare le linee di comunicazione dal modem. Dotata di una presa a muro correttamente installata. Dotata di spazio sufficiente ad accedere ai cavi di alimentazione, i quali rappresentano il mezzo principale di scollegamento del sistema. Intel® Entry Server Chassis SC5275-E User Guide xiii...
  • Page 14 Preface Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 15: Table Of Contents

    Install the Access Cover... 27 3 Maintaining Your Server ... 29 Tools and Supplies Needed ... 29 Safety: Before You Remove the Access Cover(s) ... 29 Warnings and Cautions... 29 Replacing Fans ... 31 Intel® Entry Server Chassis SC5275-E User Guide...
  • Page 16 Figure 2. Mechanical Locks ... 7 Figure 3. Removing the Access Cover ... 11 Figure 4. Removing the Front Bezel ... 12 Figure 5. Installing the I/O Shield... 13 Intel® Entry Server Chassis SC5275-E User Guide Chassis Subassembly Products ... 53...
  • Page 17 Power Supply System Output Capability ... 39 Table 5. Environmental Specifications... 40 Table 6. Power Usage Worksheet 1 ... 43 Table 7. Power Usage Worksheet 2 ... 44 Table 8. Product Certification Markings ... 46 Intel® Entry Server Chassis SC5275-E User Guide xvii...
  • Page 18 Contents Intel® Entry Server Chassis SC5275-E User Guide xviii...

  • Page 19: Chassis Description

    600 Watt PFC power supply. Cooling Two system fans inside the chassis and one power supply fan provide cooling and airflow. Intel® Entry Server Chassis SC5275-E User Guide TP00835 C. Hex head 6-32 x 6mm [.256] Figure 1. Screw Description...

  • Page 20: Chassis Front View

    Chassis Description Chassis Front View Intel® Entry Server Chassis SC5275-E User Guide Front panel controls and indicators 5.25-inch removable media drive bays C. 3.5-inch removable media drive bay D. Internal hard drive bay cage (behind door) Security lock USB port...

  • Page 21: Front Panel Controls And Indicators

    Green Hard Drive activity Green Amber Status LED Green Amber Intel® Entry Server Chassis SC5275-E User Guide Power / sleep LED Power button C. NMI button D. Reset button Sleep button NIC 1 activity LED G. NIC 2 activity LED H.

  • Page 22: Chassis Rear View

    Chassis Description Chassis Rear View Intel® Entry Server Chassis SC5275-E User Guide Alternate Serial B port knockout Alternate ICMB or external SCSI knockout C. AC input power connector D. Power supply I/O ports* G. Expansion slot covers H. ICMB or external SCSI knockout...

  • Page 23: Peripherals

    SATA Hot Swap Drive Bay Upgrade Kit* Intel® Workstation Cooling Kit ICMB Board Kit* External SCSI Adapter Cable* * Not available for use with all server boards. Intel® Entry Server Chassis SC5275-E User Guide Order Code AXX6SCSIDB AXX6SATADB APT2WKTCOOLKIT AXX2ICMBKIT...

  • Page 24: Power Supply

    <HAR> (harmonized) or VDE certified cordage to comply with the chassis’ safety certifications. Chassis Security To help prevent unauthorized entry or use of the server, the chassis includes one chassis intrusion switch at the rear of the chassis. This intrusion switch can be monitored by server management software.

  • Page 25: Mechanical Locks

    The front bezel has a two-position lock to prevent access to the hard drives and the interior of the chassis. A padlock loop is included with the chassis and can be installed at the rear of the chassis. Intel® Entry Server Chassis SC5275-E User Guide Location to install padlock loop Front bezel locked position Figure 2.
  • Page 26 Chassis Description Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 27: Setting Up The Chassis

    2 Setting Up the Chassis This chapter describes how to set the server up for the first time. With the exception of replacing the front panel board (discussed in Chapter 4), it is necessary to remove only the left access cover, not the cover at the right.

  • Page 28: Warnings And Cautions

    Warnings and Cautions These warnings and cautions apply whenever you remove the access cover(s) to access components inside the server. Only a technically qualified person should integrate and configure the server. WARNINGS The power button on the front panel DOES NOT turn off the AC power.

  • Page 29: Remove The Access Cover

    4. Pull the entire cover upward, straight away from the chassis, to disengage the rows of tabs from the notches in the top and bottom edges of the chassis. Set the cover aside. Intel® Entry Server Chassis SC5275-E User Guide Figure 3. Removing the Access Cover...

  • Page 30: Remove The Front Bezel

    2. Remove the bezel from the tabs at the right side of the chassis (facing down in the following figure). See number 2 in the figure. Intel® Entry Server Chassis SC5275-E User Guide TP00086 Figure 4. Removing the Front Bezel...

  • Page 31: Install The I/O Shield

    I/O connectors (e.g., keyboard and mouse). 1. If an EMI gasket was provided with your server board, install it now. 2. Install the shield from the inside of the chassis. Orient the shield so that the cutouts align with the corresponding I/O connectors on the server board.

  • Page 32: Install The Server Board Standoffs And Bumpers

    Setting Up the Chassis Install the Server Board Standoffs and Bumpers The location of the standoffs and bumpers varies by server board. Read and follow the instructions provided with the server board Quick Start User’s Guide for proper standoff and bumper placement.

  • Page 33: Peripheral Drives

    The number supported by the bus on your server board The number of physical drive bays available The combination of SCSI and IDE devices The amount of power required by other components in your chassis. Intel® Entry Server Chassis SC5275-E User Guide Figure 7. Installing a Floppy Drive TP00060...

  • Page 34: Installing A 5.25-Inch Removable Media Device

    1. Remove the EMI shield by using the finger-slots to grasp it and pull it straight out. Save the shield in case you later remove the peripheral. 2. Remove the plastic filler panel from the bezel. Intel® Entry Server Chassis SC5275-E User Guide Figure 8. Removing EMI Shields TP00061...
  • Page 35 The rails must be installed with the metal flange with the screw holes to the front of the drive and the flap with the screw holes must point away from the drive. Intel® Entry Server Chassis SC5275-E User Guide Figure 9. Slide Rails TP00081...
  • Page 36 8. Use two screws for each slide rail to attach the device at the front of the chassis. 9. Connect the data and power cables to the drive. The connectors are keyed and can be inserted in only one way. Figure 10. Installing a Removable Media Device Intel® Entry Server Chassis SC5275-E User Guide TP00065...

  • Page 37: Install The Server Board

    2. Slide the drive cage out of the chassis. You may need to push the cage out from the inside of the chassis. 3. For additional information, read and follow the instructions provided with the server board Quick Start User’s Guide. These instructions will guide you through preparing the board, processors, and memory for installation.

  • Page 38: Installing 3.5-Inch Hard Drive

    3. Remove the drive from its protective wrapper and place it on an antistatic surface. 4. Record the drive model and serial numbers in your equipment log. 5. Set any jumpers or switches on the drive according to the drive manufacturer’s instructions. Intel® Entry Server Chassis SC5275-E User Guide...
  • Page 39 9. Use four screws (screw A), attach the drive to the cage. Figure 12. Attaching a Hard Drive to a Cage Intel® Entry Server Chassis SC5275-E User Guide Screw tabs. Point up when installing drives. Airflow baffles (one at top of cage, the other at the bottom of cage)
  • Page 40 11. Insert and tighten the four screws removed in Step 1. 12. Attach data and power cables to the drive(s). Figure 13. Installing the Hard Drive Bay Cage Intel® Entry Server Chassis SC5275-E User Guide Data and power cables Screw tabs. Point toward top of chassis.

  • Page 41: Connect Cables To The Server Board

    6. Connect the floppy cable to the server board. Cable provided with server board. 7. Connect the chassis intrusion cable to the server board. 8. If desired, connect the serial port cable to the server board and mount it on the rear of the chassis.

  • Page 42: Installing An Add-In Board

    6. Hold board by its top edge or upper corners. Firmly press it into an expansion slot on the server board. The end of a full-length expansion card must slide into the plastic card guide slot at the front of the chassis and the tapered foot on the expansion card bracket must fit into the slot in the retention slot frame.
  • Page 43 Setting Up the Chassis Intel® Entry Server Chassis SC5275-E User Guide Snap-in slot cover Tapered foot C. Slot Figure 14. Installing an Add-in Board OM11961...

  • Page 44: Install The Front Bezel

    3. Rotate the left side of the bezel (facing up in the figure below) over the side of the chassis to engage the two tabs. See number 3 in the figure. The installation of the chassis access cover will prevent the bezel from being removed. Intel® Entry Server Chassis SC5275-E User Guide Figure 15. Installing the Front Bezel TP00056...

  • Page 45: Install The Access Cover

    Setting Up the Chassis Install the Access Cover 1. Place the cover so the tabs on the cover fit into the slots on the server. The cover should be flush against the chassis. 2. Slide the cover forward until it stops (letter A in the figure below).

  • Page 47: Maintaining Your Server

    Maintaining Your Server 3 Maintaining Your Server This chapter describes how to replace components in your server after it has been set up. Tools and Supplies Needed Phillips (cross head) screwdriver (#2 bit) Small flathead screwdriver Antistatic wrist strap (recommended)
  • Page 48 If you place the server board on a conductive surface, the battery leads may short out. If they do, this will result in a loss of CMOS data and will drain the battery. Use a conductive foam pad if available but not the board wrapper.

  • Page 49: Replacing Fans

    7. Use a flat-head screwdriver to pry up the four nylon rivets that hold the fan in place. 8. Slide the fan out through the fan opening. Figure 17. Replacing the Front System Fan in a Standard Drive Cage Intel® Entry Server Chassis SC5275-E User Guide TP00078...

  • Page 50: Replacing A Rear System Fan

    Maintaining Your Server 9. Slide the new fan in through the fan opening. Make sure the airflow is towards the server board. This means the label should face the server board. 10. Replace the nylon rivets to attach the fan to the hard drive bay cage.

  • Page 51: Replacing The Power Supply

    9. Connect the power cables to the server board and peripherals. 10. Replace the access cover. 11. Connect the A/C power to the power supply. Figure 18. Replacing the AC Power Supply Intel® Entry Server Chassis SC5275-E User Guide Screw locations TP00068...

  • Page 52: Replacing The Front Panel Board

    7. Remove the front panel board through the access hole. See number 2 in the figure below Figure 20. Removing the Front Panel Board Intel® Entry Server Chassis SC5275-E User Guide Right side of chassis, access cover removed Access to Front Panel Board Figure 19.
  • Page 53 10. Insert and tighten the three screws removed earlier. Figure 22. Inserting the Front Panel Board 11. Replace the right access cover. 12. Replace the bezel. 13. Replace the left access cover. Intel® Entry Server Chassis SC5275-E User Guide TP00082 TP00083...

  • Page 54: Replacing The Usb Cable

    12. Install the bracket over the USB port at the front of the chassis. 13. Reinstall all add-in cards. 14. Replace the bezel. 15. Replace the access cover. Intel® Entry Server Chassis SC5275-E User Guide Figure 23. Installing the USB Cable TP00079...
  • Page 55 Maintaining Your Server Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 57: Technical Reference

    The expansion slots on the server board are rated for no more than 25 Watts for any one slot. The average current usage per slot should not exceed 13 Watts.

  • Page 58: System Environmental Specifications

    Operating Packaged Acoustic noise Electrostatic discharge (ESD) Intel® Entry Server Chassis SC5275-E User Guide –40 ° to 70 °C. 5 ° to 35 °C; derated 0.5 °C for every 1000 ft (305 m) to a maximum of 10,000 ft. 95% relative humidity (non-condensing) at 30 °C.

  • Page 59: Equipment Log And Worksheets

    Equipment Log and Worksheets Equipment Log and Worksheets Equipment Log Use the blank equipment log provided here to record information about your server. You will need some of this information when you run the SSU. Item Manufacturer Name and Model Number Serial Number...
  • Page 60 Equipment Log and Worksheets Equipment Log (continued) Item Manufacturer Name and Model Number Serial Number Date Installed Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 61: Current Usage

    Expansion Board 2 Expansion Board 3 Expansion Board 4 Expansion Board 5 Expansion Board 6 Expansion Board 7 Total Current Intel® Entry Server Chassis SC5275-E User Guide Current (maximum) at voltage level: +3.3 V +5 V –5 V +12 V –12 V...

  • Page 62: Table 7. Power Usage Worksheet 2

    Do not exceed a combined power output of 120 Watts for the +5 V and +3.3 V outputs. Exceeding a combined 120 Watts will overload the power subsystem and Intel® Entry Server Chassis SC5275-E User Guide Total Watts for each voltage level...

  • Page 63: Regulatory And Compliance Information

    The Entry Server Chassis SC5275-E has been has been tested and verified to comply with the following electromagnetic compatibility (EMC) regulations when installed a compatible Intel system. For information on compatible host system(s) refer to Intel’s Server Builder Web site or contact your local Intel representative.

  • Page 64: Certifications / Registrations / Declarations

    Table 8. Product Certification Markings Regulatory Compliance Country cULus Listing Marks USA/Canada GS Mark Germany CE Mark Europe FCC Marking (Class A) EMC Marking (Class A) Canada VCCI Marking (Class A) Japan Intel® Entry Server Chassis SC5275-E User Guide Marking...

  • Page 65: Electromagnetic Compatibility Notices

    (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For questions related to the EMC performance of this product, contact: Intel Corporation 5200 N.E. Elam Young Parkway Hillsboro, OR 97124 1-800-628-8686 Intel® Entry Server Chassis SC5275-E User Guide Marking...

  • Page 66: Industry Canada (Ices-003)

    This product has been tested in accordance too, and complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been marked with the CE Mark to illustrate its compliance. Intel® Entry Server Chassis SC5275-E User Guide...

  • Page 67: Vcci (Japan)

    English translation of the notice above: 1. Type of Equipment (Model Name): On License and Product 2. Certification No.: On RRL certificate. Obtain certificate from local Intel representative 3. Name of Certification Recipient: Intel Corporation 4. Date of Manufacturer: Refer to date code on product 5.

  • Page 68: Regulated Specified Components

    URL: http://channel.intel.com/go/serverbuilder If you do not have access to Intel’s Web address, please contact your local Intel representative. Server Chassis (base chassis is provided with power supply and fans)UL listed. Server boardyou must use an Intel server board—UL recognized.

  • Page 69: Getting Help

    Telephone All calls are billed US $25.00 per incident, levied in local currency at the applicable credit card exchange rate plus applicable taxes. (Intel reserves the right to change the pricing for telephone support at any time without notice). In U.S. and Canada...
  • Page 70 999-119; once connected, dial 800-843-4481 Miami 1-800-621-8423 For an updated support contact list, see Intel® Entry Server Chassis SC5275-E User Guide Ecuador (Pacifictel) contact AT&T USA by dialing 1-800-225-528; once connected, dial 800- 843-4481 Guatemala contact AT&T USA by dialing 99- 99-190;...

  • Page 71: Warranty

    Product or to refund the then-current value of the Product. In no event will Intel be liable for any other costs associated with the replacement or repair of Product, including labor, installation or other costs incurred by buyer and in particular, any costs relating to the removal or replacement of any product soldered or otherwise permanently affixed to any printed circuit board.

  • Page 72: Warranty Limitations And Exclusions

    Limitations of Liability Intel’s responsibility under this, or any other warranty, implied or expressed, is limited to repair, replacement, or refund, as set forth above. These remedies are the sole and exclusive remedies for any breach of warranty.

  • Page 73: How To Obtain Warranty Service

    Warranty How to Obtain Warranty Service To obtain warranty service for this Product, you may contact Intel or your authorized distributor. North America and Latin AmericaTo obtain warranty repair for the product, please go to the following Web site to obtain instructions: http://support.intel.com/support/motherboards/draform.htm...

This manual is also suitable for:

Sc5275-e

Table of Contents