Setting The Time Signature; Edit Mode - Yamaha MSS1 Owner's Manual

SETTING THE TIME
SIGNATURE
Setting the Starting Time Signature
1.
о
mq
In the EDIT mode (press the EDIT key) press the JOB key and select job number
4: TIME SIGNATURE
(press JOB, enter "4" then press ENTER). The default
4/4 time signature for measure 1 will be displayed on the LCD.
To change the starting (measure 1) time signature, press the EDIT-REPLACE
(TIME CUE) key.
Select the first figure of the time signature using the YES and NO keys, or directly
enter the number via the 10-key pad (numbers 1 through 16 are acceptable).
Press ENTER.
Select the second figure of the time signature using the YES and NO keys, or
enter the figure directly via the 10-key pad (2, 4, 8 and 16 are acceptable).
Press ENTER.
Press the STOP key to exit the time signature mode, or go on to the "Inserting
a Time Signature Change" steps below.
EDIT MODE
|
| JOB | I
Ж. "4"
ЕМТЕВ
7
Be
mn
MEAS: 0001. 04/04
To change, use [YES]/[NO] or 10-key pad
| ENTER |
г)
‚ MEAS: 0001. 06/04
To change, use [YES]/[NO] or 10-key pad
To next step || |
| $ТОР
ее,
13