Footswitch Memory Recall Range Edit - Yamaha FX500 Operation Manual

■
Footswitch Memory Recall Range
Edit
The FX500 permits memory selection via an optional
Yamaha FC4 or FC5 footswitch connected to the
MEMORY INC/DEC TRIGGER footswitch jack (as long as
the footswitch is assigned to MEMORY INC/DEC operation
using the'Footswitch Function Select function described
above). The Footswitch Memory Recall Range Edit
function permits setting the range of memory location
numbers that will be selected when the footswitch is
pressed.
PQ
F.SW MEMORY RCL
RANGE 60 TO 70
If, for example, the RANGE parameter is set to "20 TO 30"
as shown in the LCD illustration above, each time the
footswitch is pressed the next highest memory locatbn will
be selected until the last number in the specified range is
reached. After the last number in the specified range, the
first (lowest) number is selected and the process repeated.
Reverse sequences can be programmed by entering the
highest number in the range before the lowest, as shown
below.
PC F.SW MEMORY RCL
RANGE 64 TO 61
In this case the selection sequence is: 64 63 -» 62 -» 61
64, etc.
® Use the UTILITY key to call the F.SW MEMORY RCL
display. The underline cursor should be located under
the first memory number in the range.
(D Use the Aand Tkeys to enter the first number in the
range.
(3) Press the PARAM (►) key to move the cursor to the
second number in the range.
0 Use the Aand Tkeys to enter the second number in
the range. The MEMORY (•^ key can be used to
return to the first number in the range if necessary.