Advantech-DLoG DLT-V7210KD User Manual page 86

9.6. MPair
With the help of the MPair application, Bluetooth® capable 2D scanners can be
connected to the terminal by scanning an onscreen barcode.
NOTE
MPair supports the following operating systems.
NOTE
For a more detailed description of the configuration to be made and the handling of the
MPair application, please refer to the separately available Manual DLoG Config v551
(or higher) from our homepage.
www.advantech.eu-> Products
Intelligent Mobile Solutions & Logistics -> Industrial Mobile Computers -> Vehicle Mounted Computers
-> DLT-V72 FACELIFT -> Documents & Downloads -> Manual DLoG Config tool
or: https://www.advantech.eu/support/details/manual?id=1-23H5606
DLT-V72 Series User Manual V2.76
This function is only available for industrial computers of the DLT-
V72 and DLT-V83 series, which are equipped with the WLAN-Card
SPARKLAN WPEQ-261ACN (BT).
Windows 10 IoT Enterprise 2016
•
Windows 10 IoT Enterprise 2019
•
• Windows 10 IoT Enterprise 2021
MPair only supports the connection of scanners with the Bluetooth®
profile SPP "Serial-Port-Profile". USB-HID Bluetooth® connections
are not supported by MPair.
General Device Configuration
86 / 189