10.8.4. Driver download
The currently available IGX drivers can be downloaded from the following Link.
Link to available Drivers:
->Additional-Driver-Software ->WLAN_driver ->X86_(DLOG_MPC_MTC_IPC_series -
>Sparklan_261_ACN_BT ->IGX
Once the download has completed, the contents of the ".zip" directory on the desktop
must be unzipped.
NOTE
10.8.5. After image reinstallation: Driver installation
If the image has been reinstalled, the DLT-V72 must be set up again using the IGX WLAN
driver. Two drivers are available:
Driver for Win7Pro and WES7
Driver for Win10IoTEnt
10.8.6. "Silent" Driver installation WES7 / Win7Pro / Win10IoTEnt
1. Open the corresponding installation directory depending on the operating
2. Run "Silent_Install.bat" (Run as administrator) to start the installation.
3. Confirm the Windows UAC (User-Account-Control) message.
The installation process will be done automatically in background and takes around 2
minutes.
At the end of process, no dialog will be shown to user and system restart is required.
NOTE
DLT-V72 Series User Manual V2.76
https://cutt.ly/AEU_SIOT_FAE_CUSTOMER
Requirements:
The IGX driver needs a valid license.
The following steps should be performed as the Administrator for
the installation process.
system.
Please allow 2 minutes waiting time that process can be finished
successfully before restarting the system.
WLAN Configuration
108 / 189
Need help?
Do you have a question about the DLT-V7210KD and is the answer not in the manual?
Questions and answers