Advantech-DLoG DLT-V7210KD User Manual page 75

8.6. Operating states
LED status
Supply voltage
OFF
OFF
FLASHING
OFF
ON
ON
ON
DLT-V72 Series User Manual V2.76
DLT-V72 status
Temperature
OFF
Initial state, idle time – waiting for a new
ignition signal or for the POWER button
after switch-off; no voltage supply
FLASHING Temperature sensor faulty
OFF DLT-V72 is in standby mode (S3)
ON Computer will only start if the temperature
in the device is in the range between -30
and +59 °C again.
OFF
Computer start-up/normal operational
state/shutdown delay time
ON Screen defroster active
FLASHING Ambient temperature lies outside of the
permitted range, i.e. < -30 or > +50 °C
Operating the DLT-V72
75 / 189