Advantech-DLoG DLT-V7210KD User Manual page 57

4. Hold cards and sticks securely and carefully, and insert
5. To remove the CFast card, carefully push on the card.
6. Use only CFast cards that have been approved by Advantech.
7. The device is only permitted to be operated again once the
Open sealing plate:
1. Unfasten both screws on the sealing plate with a 3 mm Allen wrench.
2. Remove the sealing plate from the device. The interfaces are now
accessible.
Close sealing plate:
1. Place the sealing plate back onto the DLT-V72.
2. Tighten both screws with a 3 mm Allen wrench (1 Nm torque).
DLT-V72 Series User Manual V2.76
precisely into the connections to avoid anything falling inside
the device.
sealing plate is properly sealed again; only then is the
protection class guaranteed.
Connectors
57 / 189