Administrator Management Operations
To specify a limit on copies that can be printed ("Max. Copy Sets"
parameter)
This parameter is used to specify the maximum number of copies that
can be printed.
Follow the procedure described in "To display the Administrator
Management screens" on page 12-1.
Touch [ADMIN. 1], and then touch [ADMIN. SET].
Touch [MAX. COPY SETS].
Use the keypad to specify the
maximum number of copies, and
then touch [ENTER].
A number between 1 and 99 can be
specified.
Continue touching [ENTER] to return to the Utility screen, and then
touch [EXIT] to return to the Basics screen.
Di2510f/Di3510f
12-7