Power Management Setup - NEC VERSA 6200MX User Manual

T
Plug and Play Aware O/S — Selects whether or not the system boots to a
Plug and Play operating system.
T
NumLock (at Boot) — Specifies whether NumLock is On or Off at sys-
tem startup.
T
Keyboard Auto-Repeat Rate — Defines the speed at which a repeat key
repeats.
T
Keyboard Auto-Repeat Delay — Defines how long a key waits before
beginning to repeat.
T
Password Check — Specifies if the system prompts you to enter a pass-
word when resuming operation from a Save to File state.

Power Management Setup

The Power Management Setup menu lets you balance high performance and
energy conservation using parameters including the following.
NOTE
and Windows 95 have their own power management software which
overrides CMOS settings. In this case, be sure to set your desired
power management settings accordingly.
T
Power Management Under AC — Specifies whether to enable power
management features when AC power is in use. When AC power is con-
nected to your NEC Versa system, power management is usually dis-
abled. If you enable this parameter, the system automatically activates
the power management profile you set even when AC power is used.
T
Power Savings Level — Lets you choose one of four levels of power
management.
3-8 Using Setup
Some operating systems such as Windows for Workgroups
High Perform provides the greatest system performance with only
minimal power conservation.
Long Battery provides the maximum amount of power savings.
Off disables power management and all device timeouts.