Removing A Device From The Versabay Ii - NEC VERSA 6200MX User Manual

Removing a Device from the VersaBay II

Use the following steps to remove the standard diskette drive or other device
from the VersaBay II.
Make sure the NEC Versa 6200MX is powered off, all options are dis-
1.
connected, and the LCD panel is closed.
Your system must be powered off before removing or inserting de-
vices in the VersaBay II.
Turn the system upside down.
2.
Locate the VersaBay II release latches on the bottom of the unit.
3.
Slide the front latch towards the hard disk drive side of the system and
4.
hold it.
Push the middle latch towards the front of the system until the drive pops
5.
part way out of the unit.
!
CAUTION
VersaBay II release latches
Using Your NEC Versa 6200MX 4-7