Using Headphones; Using The Built-In Speakers; Using External Stereo Speakers - NEC VERSA 6200MX User Manual

Select your audio source as follows:
2.
T
If playing a file, use the File menu to specify the file name.
T
If playing from a device, use the Device menu to select your audio
source.
Once your file is open or your source specified, press the play button.
3.
Press the square Stop button to stop playing the audio.
4.

Using Headphones

The NEC Versa 6200MX headphone port delivers sound at half a watt. The
stereo headphones plug in through the headphone jack located on the left
side of the NEC Versa 6200MX. Adjust the volume with the audio software
on the NEC Versa 6200MX.
If the software sets the volume to medium, the knob controls volume from
low to medium. If software sets the volume to high, the knob controls vol-
ume from low to high.
NOTE

Using the Built-In Speakers

The NEC Versa 6200MX has built-in stereo speakers that are always avail-
able. Adjust the volume through the software or with the volume control
knob located on the left side of the NEC Versa 6200MX.

Using External Stereo Speakers

For full stereo sound impact, you can plug a pair of stereo speakers into the
line-out jack located on the left side of the system. Adjust the volume through
software, with the volume control knob located on the left side of the system,
or through the controls on the speakers.
5-6 Using Multimedia
Using headphones disables the internal speakers.