Performing The Bios Update - NEC VERSA 6200MX User Manual

T
Close the LCD panel and turn the system upside down.
T
Replace the speaker cap screws.
Your system is now ready for the BIOS update. Continue to the next
9.
section to update the BIOS.

Performing the BIOS Update

Use the following procedure to perform the actual BIOS update.
Make sure that the computer is operating under AC power, and that the
1.
power is off. Insert the BIOS Update diskette into diskette drive A.
Power on the computer with the diskette in drive A. The computer boots
2.
and automatically loads the utility. A message similar to the following
appears:
Press
3.
4-52 Using Your NEC Versa 6200MX
FLASH ROM EQUIPPED
WARNING: The BIOS Update Procedure
is about to begin, press ENTER to continue.
To abort, remove the diskette and reset the unit.
to continue.
Enter
Reassembling the system