How To Use Laplink - NEC VERSA 6200MX User Manual

How to Use LapLink

Follow these steps to get started using LapLink. Once you have LapLink up
and running, refer to LapLink's online help for more information.
Start the LapLink Traveling software as follows:
1.
T
In Windows for Workgroups, locate and double click the LapLink
group icon. Select LapLink for Windows.
T
In Windows 95, press
locate the LapLink for Windows 95 folder. In the folder, highlight the
LapLink line and press the VersaGlide selection button or tap the
VersaGlide pad once.
If you do not have a port enabled, LapLink prompts you to enable one.
Press
port. Otherwise, press
Once your ports are configured, select your communication method by
2.
pressing the appropriate button. The buttons give you the following con-
nection options. (Balloon help displays each button's function.)
T
Connect over cable
T
Connect over wireless
T
Connect over modem
T
Connect over network
T
Connect over dial-up network
Once communication is established between systems, the LapLink win-
dow is displayed.
Select the procedure you want to use by pressing one of the last three
3.
buttons in the LapLink toolbar at the top of the screen. (Balloon help
displays each button's function.)
T
Press the file transfer button to transfer files between systems.
T
Press the Remote Control button to exercise control over a remote
system.
T
Press the Chat button to converse with another user at the remote
system.
Start
Yes to do so and follow the on-screen instructions to configure the
.
No
, slide the cursor over to Programs, and
Introducing the Software 2-9