Table of Contents
Advertisement
T
Locate and push up on the drive cover release latch while using some
pressure to slide the cover away from the system.
T
Lift the cover up and off the system.
4.
Remove the hard disk drive as follows:
T
Using your fingers, press down on the hard disk drive at the end
closest to the connector.
T
While maintaining pressure, slide the drive towards the front of the
system.
Do not lift the drive out of the system before releasing it from the
system connector. Doing so can damage the connectors.
4-26 Using Your NEC Versa 6200MX
Removing the drive bay cover
!
CAUTION
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA 6200MX and is the answer not in the manual?