Table of Contents
Advertisement
NOTE
press the button to disconnect the card when it is not in use. You
can leave the card in the slot while it is disconnected for easy
storage.
Windows 95 Systems
Remove PC cards from Windows 95 systems as follows.
1.
From the screen, select "My Computer" and "Control Panel." (Or, you
can also select the Taskbar PCMCIA icon.)
2.
Select the PCMCIA icon.
3.
Select the PCMCIA card to remove, and select "Stop."
Windows 95 alerts you if any applications are still using the card. If all
applications using the card are closed, services for that card are shut
down. You receive a message saying that it is safe to remove the card.
4.
Press the button on the side of the PC card in the slot.
5.
Pull the card firmly out of the slot.
PC Card Drivers and Enablers
Your NEC notebook computer is configured to support a variety of PC
cards. In Windows for Workgroups, the AUTOEXEC.BAT and
CONFIG.SYS files contain and load the PC card drivers. You can modify
these files using a text editor to remove drivers in order to free needed
memory.
Some PC cards come with software called Enablers to be used instead of
Card Services. Before installing Enablers, try your PC card with the pre-
loaded drivers. The NEC Versa 6200MX Card and Socket Services works
with many PC cards.
PC Card Drivers and Utilities
The following are the CardSoft drivers (for Windows for Workgroups sys-
tems only) and utilities used on your NEC Versa 6200MX. Some of these
drivers may be disabled in the system files to conserve memory.
PC cards draw power even when not in use. To save energy,
Using Your NEC Versa 6200MX 4-15
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA 6200MX and is the answer not in the manual?
Questions and answers