Table of Contents
Advertisement
Align and connect the other end of the cable to the parallel port on the
4.
device. Lock the connector clips.
5.
Connect the power cable to the device and a properly grounded wall
outlet.
6.
Turn on power to the system and the device.
NOTE
the instructions that came with the device for more information.
Serial Devices
To install a serial device such as a printer or an external modem, you need a
cable with a female 9-pin connector.
NOTE
printer driver through the Windows Control Panel.
Follow these steps to connect a serial device to your NEC Versa 6200MX.
Check that the device is online before you try to use it. See
When you connect a printer, be sure to install the appropriate
Connecting a parallel printer
Using Your NEC Versa 6200MX 4-39
Advertisement
Table of Contents
Need help?
Do you have a question about the VERSA 6200MX and is the answer not in the manual?