Moving The Hard Disk Drive; Power Management Setup - NEC VERSA VX Manual

Moving the Hard Disk Drive

When a password protected HDD is moved from its original system and installed in
another system, error messages appear indicating that the drive is locked. Next, the
Security Setup screen appears requiring the user to enter the master password to unlock
the drive. Highlight the HDD password line and enter the master password, when
prompted.
If you wish to move an HDD from one system to another, follow steps 1 through 6 in
the section, "Establishing Hard Disk Drive Passwords," before installing the HDD in a
different system. Install the HDD in the desired system then follow step 7 to establish
HDD protection.
To take advantage of HDD password protection in another system, the system must be
equipped with the same HDD password protection feature. To determine if the system
has HDD password, check the System Security Setup in the BIOS setup to see if there
are provisions for establishing HDD passwords.

Power Management Setup

Use the Power Management Setup to balance high performance and energy
conservation.
Parameter
System Switch
Power Management
under AC
Power Savings Level
CPU Speed Control
Hard Disk Timeout
Video Timeout
Peripheral Timeout
Audio Device Timeout
Standby Timeout
Auto Suspend Timeout
LCD Suspend
Power Management Setup
Default
Setting
Power Button
Off
Longest Life
100%
1
2 minutes
1
2 minutes
1
On
1
On
1
4 minutes
1
10 minutes
Disabled
Alternate Setting(s)
Sleep Button
On
High Perform/Custom/Off
12.5, 25, 50%
5/30/45 sec; 1/4/6/8/10/15 min.
Off
30/45 sec.; 1/4/6/8/10/15 min.
Off
Off
Off
Off/1/2/6/8/10/15 min.
Off/5/15/20/25/30 min.
Enabled
Using the BIOS Setup Utility 3-11