Table of Contents
Advertisement
T
Avoid scratching or soiling the side of the disc that has no printing or
writing on it. This is the data side of the disc.
T
Do not write on or apply labels to either side of the disc.
T
Keep the disc away from direct sunlight or high temperatures.
T
Clean fingerprints or dust from the disc by wiping it with a soft cloth.
Gently brush the cloth from the center of the disc toward the edge.
Avoid using benzene, paint thinner, record cleaner, static repellent,
or any other chemical on the disc. Chemicals and cleaners can
damage the disc.
PC CARD SLOTS
Your NEC Versa 6200MX notebook integrates two card bus slots for insert-
ing two Type I or Type II PC cards. (You can insert one Type I and one
Type II PC card in the slots at the same time.) You can also insert one Type
III PC card.
Using the system's card bus slots, you can add optional PC cards and con-
nect external devices to your NEC Versa 6200MX. These devices include
peripheral devices, such as modems, LAN cards, and storage cards. For de-
tails on how to obtain these options, see the online Options Catalog.
Inserting a PC Card
To insert a PC card, open the slot cover and follow these steps.
Align the card so that the 68-pin connector points towards the slot.
1.
2.
Slide the card into either slot. A low tone followed by a high tone lets you
know that the card is fully inserted and recognized. (If you turn off the
sound through the function keys or volume control, no sound is emitted.)
Other tone sequences such as high, then low tones, or a single tone in
Windows for Workgroups, indicate that the card is inserted, but the card
type is unknown.
!
CAUTION
Using Your NEC Versa 6200MX 4-13
Advertisement
Table of Contents
