Table of Contents
Advertisement
When the process completes, press
8.
Reboot your system.
CD-ROM Driver Installation
Only use this option if you are running Windows for Workgroups and are
not using the software that NEC preinstalled on your NEC Versa system.
(The preinstalled software includes these drivers.)
CD-ROM Driver Installation involves two procedures.
T
Copying the driver installation files to a temporary directory on the C:
drive.
T
Installing the drivers from the temporary directory onto your system.
These procedures are described next.
Copying the Installation Files
Initiate the procedure to copy the installation files from the Restore CD to
your system as follows:
1.
Make sure the CD-ROM reader is installed in your system and power on.
2.
Insert the Restore CD into the CD-ROM reader and reboot your system.
The system will boot from the CD.
3.
From the Restore CD menu, select "CD-ROM Drivers" and press
Read the explanation screen that appears and press the "Continue" but-
4.
ton to proceed.
Press "Yes" when the confirmation screen appears.
5.
Read the license agreement and select "I agree" to continue. The option
6.
copies the drivers to a temporary directory on your hard disk drive.
Once the drivers are copied, press "OK" and "Exit."
7.
Continue to the next section to complete driver installation.
7-14 Solving Problems
and remove the Restore CD.
Enter
Enter
.
Advertisement
Table of Contents
