NEC VERSA 6200MX User Manual page 71

Your system must be powered off before removing or inserting devices in the
VersaBay II.
NOTE
To use a hard disk drive in the VersaBay II, the drive must be
connected to the appropriate adapter. See the Options Catalog or
your authorized NEC dealer for details about the Hard Disk Drive
Cradle Pak.
Make sure the NEC Versa 6200MX is powered off, all options are dis-
1.
connected, and the LCD panel is closed.
Turn the system upside down.
2.
Locate the VersaBay II release latches on the bottom of the unit.
3.
4. Slide the front latch towards the hard disk drive side of the system and
hold it.
Align the CD-ROM reader in the VersaBay II and push it in until it locks
5.
into place.
Turn the system over and open the LCD panel.
6.
7. Power on the system.
Inserting the CD-ROM reader
Using Your NEC Versa 6200MX 4-9