Other Setup Options; Using Setup To Set Power Management; Using The Save To File (Stf) Feature - NEC VERSA 6200MX User Manual

Other Setup Options

Setup offers other options, including the following:
T
Change User Password — Lets you set a user password once a Supervi-
sor password is set.
T
Change Supervisor Password — Sets a Supervisor password at system
startup.
T
Auto Configuration with Defaults — Loads default settings.
T
Save Settings and Exit — Accepts changes made to current settings,
saves to CMOS, and exits Setup.
T
Exit Without Saving — Reverts to previously selected settings and exits
Setup.

USING SETUP TO SET POWER MANAGEMENT

Setup allows you to use the factory-defined power savings level (Longest
Life), or choose between High Perform, Custom, or Off. Each provides a
special value to your current work effort. These power management levels
were designed with you in mind. For example, you can use them under the
following circumstances:
T
Longest Life — Provides best battery life and good performance. Use
while traveling long distances.
T
High Perform — Provides best performance and good battery life. Use
while on the road, traveling short distances.
T
Custom — Lets you decide! Set power management levels according to
your own needs and present environment.
T
Off — Works well in an office environment while powering your NEC
Versa with AC power.

Using the Save to File (STF) Feature

STF protects the integrity of your working files. For example, if you are
called away from your NEC Versa and Suspend mode is selected with auto
Save to File active, your system automatically goes into Suspend mode.
After 30 minutes, if you don't return, your working environment is saved to
a special file on your hard disk.
Using Setup 3-11