Peripherals Setup - NEC VERSA 6200MX User Manual

T
PCMCIA Power — Turns power to the PC card slots on and off. If PC
cards are not in use, turning off slot power conserves considerable
power. Slot power cannot be turned off if a PC card is installed.
T
Modem Ring Resume — Lets you choose whether the system resumes
automatically when an optional modem receives a transmission.
T
Wake Up from Suspend Alarm/Resume Alarm Time — Lets you set a
resume time from Suspend mode.

Peripherals Setup

The Peripherals Setup menu displays the connection locations between the
system and the Input/Output (I/O) ports. This menu also lets you specify
different port assignments as needed.
NOTE
it using the Windows 95 device manager. The device is not listed in
the Windows 95 device list. To control the device using the Win-
dows 95 device manager, select any setting other than "Disable" in
Setup.
T
Serial Port — Allows you to disable the port or change its address as-
signment.
T
Parallel Port/Parallel Mode — Lets you disable or reassign the parallel
port and select a parallel port mode.
T
IR Serial Port/IR Serial Mode— Allows you to disable or reassign the IR
Serial port and select an IR mode.
T
TV Out Port — Specifies the signal type used by the TV being connected
to the TV Out port.
T
Sound/Sound IRQ/Sound SB-Compatible DMA/Full-Duplex Mode
DMA — Selects the sound parameter to user defined, disabled or recon-
figure. Change additional sound related items as needed.
3-10 Using Setup
If you disable a device in Setup, you cannot enable or assign