Power Management Setup - NEC VERSA FX Service And Reference Manual

Power Management Setup

Your Versa FX system ships with the Windows 98 operating system that uses the Advanced
Configuration and Power Interface (ACPI) to control most power management functions
through the Power Management Properties screen in Windows. The BIOS Power Management
Setup screen is described next.
Note
In Windows 98, the term "Standby" is functionally the same as the term "Suspend" that
is referenced in the BIOS Setup utility.
Parameter
System Switch
Power Management
under AC
Power Savings Level
CPU Speed Control
Hard Disk Timeout
Video Timeout
Peripheral Timeout
Audio Device Timeout
Standby Timeout
Auto Suspend Timeout
LCD Suspend
Suspend Option
Auto Save-to-File
Panel Brightness
Suspend Warning Tone
Remote Power On
Wake Up Alarm
Resume Alarm Time
1
Available when power savings is set to Custom
2
Resume alarm time is selectable when wake up from suspend alarm is set
!
System Switch — Sets the Power button as a power switch or a sleep button.
!
Power Management Under AC — Specifies whether to enable power management
features when AC power is in use. When AC power is connected to your NEC Versa
system, power management is usually disabled. If you enable this parameter, the system
automatically activates the power management profile you set, even when AC power is
used.
Power Management Setup
Default
Setting
Power Button
Off
Longest Life
1
50%
1
2 minutes
1
2 minutes
1
On
1
On
1
4 minutes
1
10 minutes
Disabled
Suspend
Enabled
Auto
Enabled
Enabled
Disabled
2
Off
Alternate Setting(s)
Sleep Button
On
High Perform/Custom/Off
12.5, 25, 100%
5/30/45 sec; 1/4/6/8/10/15 min.
Off
30/45 sec.; 1/4/6/8/10/15 min.
Off
Off
Off
Off/1/2/6/8/10/15 min.
Off/5/15/20/25/30 min.
Enabled
STF
Disabled
User Defined
Disabled
Disabled
Enabled
Set time in 5 min. increments when
Wake Up Alarm is set.
.
.
System Configuration and Setup 2-15