Setup Menus; Standard Cmos Setup; Advanced Cmos Setup - NEC VERSA 6200MX User Manual

Setup Menus

Read the following descriptions for explanations of items that appear in the
Setup menus, as listed in the preceding table. See the item-specific help that
appears on the Setup screen for more details.

Standard CMOS Setup

When you select the Standard CMOS Setup screen you will see System
Time and System Date parameters as well as drive parameters.
T
Date — This field lets you set your NEC Versa's calendar month, day
and year. The calendar clock is year 2000-compliant. These settings re-
main in memory even after you turn off system power
To set the date use the
Use the
T
Time — To set the time, enter the current hour, minute, and second in
hr/min/sec, 24-hour format..
To set the time use the
Use the
T
Diskette Drives — The diskette drive parameters let you check and
change settings for your diskette drives.
T
Internal Hard Disk Drive — This field allows you to enable or disable
the internal hard drive in your system. You can also define primary mas-
ter and slave drives.
T
Docking Station Drives — This field lets you enable and disable the hard
drives installed in a docking station. You can also specify the docking
station hard drive as the boot drive. (These options are only available
when the NEC Versa is docked.)
T
System Memory — Two fields display the amount of system memory
and expanded memory installed in your system. These are display-only
fields. The system automatically senses the amount of installed memory.

Advanced CMOS Setup

Advanced CMOS settings let you define the following functions.
T
BootUp Sequence — Sets the order that the drives (A:, C:) initialize, or
sets the order to search for the boot disk.
or arrow keys to move from field to field.
Tab
PgUp or PgDn key to change the numbers within each field.
Tab or arrow keys to move from field to field.
or key to change the numbers within each field.
PgUp PgDn
Using Setup 3-7