NEC VERSA 6200MX User Manual page 96

If you are replacing a DIMM and need to remove one that is already in-
stalled, do so as follows:
T
Press the locking tabs away from the sides of the DIMM and hold
while gently lifting on the edge of the DIMM.
T
When the edge of the DIMM pops up and is at approximately a 60
degree, pull the DIMM from the socket.
NOTE
board. Therefore, if you need to set any system switches, you might
want to do so while the system is already disassembled.
Reassemble the system as follows:
9.
T
Lift up the keyboard and align the tabs on the front of it with the
grooves in the system.
T
Reseat the keyboard in its original position.
4-34 Using Your NEC Versa 6200MX
The system switches are also located underneath the key-
Removing an installed DIMM