Serial Devices - NEC Versa 2700 User Manual

Serial Devices

To install a serial device such as a printer or an external
mouse, you need a cable with a female 9-pin connector.
NOTE
the appropriate printer driver through the Windows
Control Panel.
Follow these steps to connect a serial device to your NEC
Versa.
1. Check that both the NEC Versa and the device power
are off.
Open the port cover on the back of the system and locate
2.
the serial port.
Align and connect the 9-pin connector with the serial
3.
port on the system. Secure the connection with the
screws provided.
4-32 Using Your NEC Versa
When you connect a printer, be sure to install