Data Storage Devices; Device Slots; Installing A Dimm - NEC Direction SP E-Series Reference Manual

4. To install a DIMM, align the module with an empty socket. Make sure that
the notches on the DIMM line up with the keys in the sockets.
5. Insert the DIMM into the socket. Close the plastic clips at both ends of the
socket.
6. Replace any cables or boards that may have been removed.
7. Replace the access cover.

Data Storage Devices

The system board in your computer supports the following storage devices:
T
two diskette drives, including the standard 1.44-MB diskette drive and a
tape backup unit
T
up to four IDE drives.

Device Slots

Your computer has seven storage device slots:
T
a 3.5-inch accessible device slot (contains the standard 1.44-MB diskette
drive)
T
two internal 3.5-inch hard drive slots (one contains the hard drive)
T
four accessible device slots

Installing a DIMM

two accessible 5.25-inch device slots (one contains the standard
CD-ROM/DVD drive)
two 3.5-inch device slots; the lower 3.5-inch slot is not accessible on
the desktop model.
Option Installation 3-11