Table of Contents
Advertisement
The Security Submenu lets you check or change the
following password parameters.
NOTE
is "Enabled," the Unattended Start and Security Hot
Key fields are not displayed.
T
User Password
This field allows you to enable a user level password
during POST and to enter Setup. When both the "User
Password" and "Administrative Password" are
"Enabled," only the Administrative Password gives you
full access to all Setup fields. This field can be either
"Enabled" or "Disabled." The default is "Disabled."
T
Administrative Password
This field allows you to enable an administrative level
password during POST and to enter Setup. When both
the "User Password" and "Administrative Password" are
"Enabled," only the Administrative Password gives you
full access to all Setup fields. This field can be either
"Enabled" or "Disabled." The default is "Disabled."
Set User Password and Set Administrative Password
Enable either or both the User or Administrative Passwords
and a dialog box with the following prompts appears.
Passwords are not case sensitive.
To set a password, type the password and press
Reenter your password and press
4-28 Setting System Parameters
If neither the User or Administrative Password
Enter new password: [
Confirm new password:
[
Enter
.
Enter
.
]
]
Advertisement
Table of Contents
