Clear Cmos/Password - NEC POWERMATE VT 300 Manual

Processor Jumper Settings
233 MHz/66 MHz
350 MHz/100 MHz
266 MHz/66 MHz
400 MHz/100 MHz
300 MHz/66 MHz
450 MHz/100 MHz
333 MHz/66 MHz
500 MHz/100 MHz
5. Replace the left side cover (see "Replacing the Left Side
Cover" in Chapter 4).
6. Connect system power cables and external options.
7. Power on the system and run BIOS Setup utility to check
the configuration of your system.

Clear CMOS/Password

If you need to clear your password or reset your CMOS
settings to their factory state, set jumper block JBAT1 as
follows.
3-38 Configuring the System
366 MHz/66 MHz
550 MHz/100 MHz
400 MHz/66 MHz
600 MHz/100 MHz
433 MHz/66 MHz