Designated Use; Symbol Guide - Omtech SH-G570 User Manual

1.2 Designated Use

This laser engraver is intended for engraving signs and logos on consumer products or applicable
substrates. Its laser can process a wide variety of materials including wood and cork, paper and
cardboard, most plastics, glass, cloth and leather, and stone. It can also be used with some specially
coated metals. Use of this system for non-designated purposes or materials is not permitted.

1.3 Symbol Guide

The following symbols are used on this machine's labeling or in this manual:
These items indicate an imminent hazard
that WILL result in death or severe injury if
not avoided.
These items indicate a potential risk that
COULD result in death or serious injury, as
well as significant equipment damage.
These items address similarly serious
concerns about the laser beam.
These items address similarly serious
concerns about electrical components.
These items address similarly serious
concerns about fire hazards.
These items address pinching and crushing
hazards.
Protective eyewear should be worn
by anyone around this machine during
operation.
These items address that a forklift is
required for handling this machine.
These items address tips that help.
This product is sold in conformity with
applicable EU regulations.
This product contains electrical
components that should not be disposed
of with regular garbage.
2