Maintenance - Omtech SH-G570 User Manual

6 Maintenance

• Adjustment, maintenance, and repair of the electrical components of this
machine must be done ONLY by trained and skilled professionals to avoid
fires and other malfunctions, including potential radiation exposure from
damage to the laser components. Because specialized techniques are
required for testing the electrical components of this marking system, it is
recommended such testing only be done by the manufacturer, seller, or
repair service.
• Unless otherwise specified, ONLY undertake adjustment, maintenance, and
repair of the machine when it is turned off, disconnected from its power
supply, and fully cooled. For maximum safety, wait about 3 minutes after
turning the machine off before adjusting the integrated chiller or other
electronic parts. This will allow time for the ground connection to clear any
residual charge.
To ensure normal use of the laser machine, regular maintenance is essential. Handle with care
during maintenance as it contains high-precision components, and follow each part's procedures
closely to prevent damage.
For maintenance not listed in this manual, visit the Maintenance section on our
website omtechlaser.com
1
3
where real-time updates are available to assist you.
73
2