Omtech SH-G570 User Manual page 41

13. Unplug the water pump after confirmation.
For an engraver with such high power, it is recommended to use an industrial water chiller for
better cooling performance, especially when you are using the machine for a long time.
For instructions on installing the water chiller, see the manual of your water cooling system. But
keep in mind:
• Connect the water OUTLET of your water chiller to the water INLET of the engraver.
• Connect the water INLET of your water chiller to the water OUTLET of the engraver.
You can use the provided water hose clamps to seal the ports.
Water Inlet
Water chiller
Water Outlet
34