Omtech SH-G570 User Manual page 2

BEAMING
WITH
POSSIBILITIES!
Thank you for choosing our laser equipment.
Your CO ₂ laser engraving machine is intended for personal and professional use. When used under
these instructions, it falls under the category of a CLASS 1 laser product. But it includes a CLASS 4
laser and some components remain EXTREMELY dangerous under improper and/or non- intended
use. Never disable the preinstalled safety devices and always use your laser safely and responsibly.
Read this manual carefully before operation. It covers the details of correct installation, adjustment,
maintenance, and—most importantly—safe operation of your new laser. It is intended to be used in
conjunction with your engraving software manual, as the software typically does not only provide
image design but also serves as an alternative interface for the laser settings and machine controls.
You and any other users of this device should thoroughly understand BOTH manuals before
attempting to operate the laser.
Keep both manuals for future reference and provide them to ANYONE who will install, operate,
maintain, or repair this machine. Both manuals should be included if this device is given or sold to a
third party.
If you have any comments, suggestions, or questions after reading these manuals, feel free to contact
us, and we will address your concerns as soon as possible. Your feedback is invaluable to us in our
ongoing efforts to enhance the user experience!