Symbol Guide; Designated Use - Omtech MOPA LYF-20MP User Manual

1.2 Symbol Guide

The following symbols are used on this machine's labeling or in this manual:
These items present a risk of serious property damage or personal injury.
These items address similarly serious concerns with regard to the laser beam.
These items address similarly serious concerns with regard to electrical components.
Protective eyewear should be worn by anyone around this machine during operation.
This product is sold in conformity with applicable EU regulations.
This product contains electrical components that should not be disposed of with regular garbage.

1.3 Designated Use

This machine is intended for use engraving signs and other consumer products on applicable substrates. This laser
can process a wide variety of metals including steel, aluminum, titanium, brass, copper, tungsten, carbide, and
chrome. It can also be used with stone and some hard plastics such as acrylic.
Warning
• Use of this system for non-designated purposes is NOT permitted.
The system MUST be operated, maintained, and repaired by personnel familiar with the field of use and the
•
dangers of the machine and the material being engraved including its reflectivity, conductivity, potential for
creating harmful or combustible fumes, etc.
• Laser beams are dangerous. The manufacturer and/or seller bear(s) no responsibility and assume(s) no liability
for any improper use of this machine or for any damage or injury arising from such use. The operator is obliged
to use this laser marking machine ONLY in accordance with its designated use, the other instructions on the
machine and in its manuals, and all applicable local and national laws and regulations.
2