Rdworks V8 - Omtech SH-G570 User Manual

A Windows-compatible copy of RDworks V8 is provided on the USB flash drive that came with your
engraver. Since Lightburn is also commonly used, this chapter provides instructions to configure
these two softwares for the machine. Familiarize yourself with the software's image design features
and laser control settings before using it to operate the laser.
When you first configure your software to work with the laser, the device name to search for will
be the mainboard model: RDC6442G. The default origin position will be at the workbed's top right
corner. If you change this in your software, be sure to also change the control panel settings to
§ 5.4.7 Setting the Origin
match. See
3.6.1

RDWorks V8

1. Initiate RDWorks V8 on your control computer and connect it to the engraver using the provided
USB cable.
2. Click "Setting".
3. Click to tick the box as shown. Click "Modify".
on Page 66 for details.
38