GRAPHTEC miid LOGGER GL860 User Manual page 4

Do not use or store the GL860 in a location exposed to
direct sunlight or the direct draft of an air conditioner or
heater.
•
Such location may impair the GL860's performance.
Use prohibited
Do not use the GL860 in a location subject to excessive
mechanical vibration or electrical noise.
•
Such location may impair the GL860's performance.
Use prohibited
If fluid or foreign matters enters inside the GL860, turn
off the power switch and disconnect the power cord
from the electrical socket.
•
Use in such status may cause a fire hazard due to electrical
shock or current leakage.
•
Contact your sales representative or nearest
Graphtec vendor to request repair.
Unplug the power
cord from the socket
Do not attempt to lubricate the GL860's mechanisms.
•
Such action may cause the GL860 to break down.
Use prohibited
Be sure to use the Graphtec-supplied AC adapter.
•
It will damage this device.
Use prohibited
Safety Precautions
CAUTION CAUTION
Do not place the receptacles containing fluid onto this
device or close to this device.
•
Fluid spilling inside the GL860 may cause a fire hazard due
to electrical shock or current leakage.
Avoid water
To insert or disconnect the power cord or a signal input
cable, grasp the power cord's plug or the signal input
cable's connector.
•
Pulling the cord/cable itself damages the cord/cable,
resulting in a fire hazard or electrical shock.
Use prohibited
Do not use the AC power supply and the DC power
supply other than the specified supply voltage for this
device.
•
Such action may cause a fire hazard due to electric shock
or current leakage.
Use prohibited
Never clean the GL860 using a volatile solvent (such
as thinner or benzine).
•
Such action may impair the GL860's performance.
•
Clean off any soiled areas using a soft dry cloth.
Use prohibited
iii
Watch out for
electrical shock
Safety Precautions