GRAPHTEC miid LOGGER GL860 User Manual page 181

Replaying during capture
When you press the "REVIEW" key during capturing, a replay can be performed during capture.
While capturing data, you can replay the data from the beginning of the data to the point at which capturing was
performed.
During replay, you can move the cursor to check any data value.
Press the "REVIEW" key again to return to the capturing screen.
Stop capturing
1.
Press the "START/STOP" key.
2.
A confirmation message is displayed.
3.
Press the "ENTER" key to finish capturing and enter the free-running state.
Data capturing is now complete.
"REVIEW" key
4-11
Chapter 4 Example of Use